Product ID:HARDENER EP-IS
MSDS Date:05/21/1986
FSC:5610
NIIN:00F037067
Kit Part:Y
MSDS Number: BVSZC

Emergency Phone: 800-888-8372/914-347-4700

Info Phone: 800-888-8372/914-347-4700

Preparer: M MUNSELL

Cage: EO945

Telephone: 800-888-8372

Cage: 07566

2,2,4(OR 2,4,4)-TRIMETHYL-1,6-HEXANEDIAMINE *94-3*

CAS: 25513-64-8

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: CORROSIVE. CAUSES
IRRITATION & BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: CORROSIVE. CAUSES IRRITATION &
BURNS.
Medical Cond Aggravated by Exposure:SKIN & EYE CONDITIONS.

First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER TO
DRINK. DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. GIVE
OXYGEN/CPR IF NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.
REFERRAL TO A PHYSICIAN IS RECOMMENDED IF THERE IS ANY QUESTION
ABOUT THE SERIOUSNESS OF ANY INJURY.

Flash Point Method:PMCC
Flash Point:210F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS.

Spill Release Procedures:REMOVE BY ABSORBING IN ABSORBENT MATERIAL.
AVOID CONTACT.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. USE W/ADEQUATE
VENTILATION.
Other Precautions:DON'T GET IN EYES, ON SKIN, ON CLOTHING. AVOID
BREATHING VAPOR/MIST. NUISANCE DUST MAY BE GENERATED WHEN
SANDING/SAWING CURED MATERIAL.

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL & LOCAL EXHAUST IN ACCORDANCE W/ACGIH
RECOMMENDATIONS
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Vapor Pres:0.045
Spec Gravity:0.85-0.9
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR AMBER LIQUID W/AMINE ODOR.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS & BASES.
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CO2, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. CORROSIVE MATERIAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.